1. Home
  2. Login
  3. View Cart
  4. Checkout
  5. Checkout

Max Precision Cutter Bar

Max Precision Cutter Bar


See Details
Max Precision Cutter BarMax Precision Cutter Bar

Max Precision Cutter Bar

Ref: max

Total Price: $1,125.00


Max Cutters

Cuts Straight, Square & Clean- Ideal for producing "Grand Format" images. Unique box-frame design provides straight, square and clean cuts up to 200" and guaranteed to within .08" over the entire length of the cut.

The MAX Cutter can be used as a portable unit or located on an existing work table using the optional surface mounted Lift & Hold system. Combine the MAX with the Big Bench, you can create a complete cutting table and workstation in any workshop.

The MAX Cutter bars use utility knife blades and feature a blade depth adjustment and a spring-loaded blade ejector as standard. The medium & heavy duty utility blades will cut to a depth of 10mm (3/8”) and XR Long blades cut to a depth of 13mm (1/2”). The patented linear bearings have been tested under load for 1600km (1000 miles) and carry a 20 year guarantee. Full length silicon rubber grip strips ensure all work is clamped when cutting and also protect the surface of the material being cut.
Wide Format Cutters ranging from 140” to 200” with a 5 year general warranty on parts (except blades) and a 20 year warranty on the bearings used in the cutting head.
Size
Max Precision Cutter Bar ($1,125.00)
Max Precision Cutter Bar ($1,197.00)
Max Precision Cutter Bar ($1,341.00)

Features

Feature 1
  • Rear loading blade holder for swift replacement; blades will never pull out in heavy materials.
  • Fully equipped and ready to work with 100 medium duty utility blades included. Accepts standard utility blades.
  • Unique extrusion design allows the Max to reach Extraordinary lengths.
Feature 3
  • Quick fit thread cap for easy accessory attachment.
  • Blade locking thumb screw adds safety and convenience.
  • Rotating knob for ultra-fine blade depth adjustment.
Feature 4
  • Two full length silicone grip cords protect and clamp your materials.
  • Safe and efficient blade ejector also doubles as a cut depth gauge.
Feature 5
  • Can be used in conjunction with the Big Bench range or our independent surface mounted Lift & Hold bracket.

Features also Include:

  • High-grade polymer bearing system for lasting accuracy
  • Includes 100 Medium Duty Utility Blades
  • Accurate to withing .08"
  • 5 year general warranty
  • 20 year warranty on the bearings
  • 100% Manufactured in the UK



Big Bench

The ultimate accessory - achieve outstanding accuracy over 40” to 200”

The combination of the Big Bench or Big Bench Xtra with the choice of the Javelin, Javelin Xtra, Practik or Max creates the ultimate precision cutting table. The stability of the Big Bench with individual level adjustment on each leg provides a firm and flat work surface to ensure extreme accuracy.

With concealed corner fixings, built in cutting base plate and integral Lift & Hold system the Big Bench is a stylish and practical addition to every workshop where precise cutting is essential.

The Big Bench and Big Bench Xtra is offered in lengths to accept all sizes of Javelin, Javelin Xtra, Practik or Max Cutter bars.

Big Bench is simple to assemble and the unique assembly system is rigid and secure. Plate levelling system provides extreme flatness, consistent clamping and cutting accuracy.
The Big Bench work surface only can be extended in both the front and the back with the 12" Support Arms. Big Bench Extensions are available to extend the table beyond 12".

Worktop Not Included, 3/4" MDF Board Recommended


Outstanding Features of the Big Bench:

Feature 1
  • Position or remove Javelin, Javelin Xtra, Practik or Max cutters in seconds without using a single tool.
  • Lift & hold levers allow a single operator to feed, align and cut materials with ease.
Feature 2
  • Aluminum base-plate with metric parallel indents and cut groove.
  • Full length Metric & Imperial scale.
  • Full-length grip strip for clamping.
Feature 3
  • Base-plate leveling brackets make it possible to fine adjust leveling and gain optimum accuracy.
  • Create the ideal bench surface using a variety of worktop fixings (worktop not included).
Feature 4
  • Adjustable feet allow the Big Bench to stand on uneven floors without compromising accuracy.
Feature 5
  • Unique leg to beam fixing brackets apply incredible strength to the Big Bench.
  • The unique system allows for a wide variety of customisation options on any Big Bench.
 
  • Surface Mount Lift & Hold turns your existing work surface into a precision cutting station.
  • Recommended for Javelin & Practik Cutters up to 80".
   

Features also Include:

  • Bench includes an integral lift and hold mechanism on each side
  • Works with Javelin, Javelin Xtra, Practik & Max cutter bars 
  • Constructed of strong anodised aluminum extrusions
  • 5 year general warranty   
  • 100% Manufactured in the UK

Recently Viewed